- Rapport
- Kärnkraft
Blade Vibrations in Turbines
In the report it will be shown, which facts have to be considered for the turbine-manufacturer in the design process regarding blade vibrations. Of importance for the operator is a smooth operation of the steam turbines with a permissible state of blade vibrations. To control the actual state, blade vibrations can be measured during operation (Monitoring). By such measurements indications can be obtained about possible failure mechanisms. Vibration Standards help for an evaluation of the blade vibrations.
Ladda ner
Rapporter och publikationer
Här listas rapporter och resultatblad från programmet.
- Rapport
Blade Vibrations in Turbines
The main purpose of this Energiforsk project Blade Vibrations in Turbines is to present a clear physical description, how blade vibrations are generated and by which system parameters they are influenced.
|2025:1037Rainer Nordmann, Technical University Darmstadt- Rapport
Cavitation induced vibrations in orifice plates and a partially closed valve
This study aims to experimentally investigate flow-induced vibrations and cavitation in single-hole and multi-hole orifices and a partially closed Stafsjö valve. The goal is to provide experimental data for validating Computational Fluid Dynamics (CFD) models.
|2025:1105Kristian Angele
- Rapport
Development of a Digital Twin for Torsional Vibrations of Turbogenerators, 2025:1084
This report outlines a Digital Twin designed to monitor and evaluate these torsional vibrations, employing theoretical modeling, numerical analysis, and experimental methods for successful simulation and validation.
|2025:1084Sven Herold, Hendrik Holzmann, Rainer Nordmann, Fraunhofer Institute Lbf Darmstadt
- Rapport
DIAM – A Matrix Tool for pump vibrations
In this research project a DIAM-Matrix tool together with a flow chart has been developed for the problem of pump vibrations.
|2024-1051RAINER NORMANN TU DARMSTADT